Features

Technical Heads & Electrical Specifiers

●Precision Photometric Files: FEITUO provides certified IES point-by-point photometric data and standardized CAD/Revit BIM models, allowing electrical engineers to integrate spacing calculations directly into architectural lighting schedules.

●Full Statutory Compliance: Built and verified in strict accordance with UL 924, NFPA 101, NFPA 70 (NEC Article 700), and OSHA 1910.37, ensuring trouble-free Authority Having Jurisdiction (AHJ) field inspections.

●Transient-Voltage Protection: Equipped with solid-state surge suppression and low-voltage disconnect circuits, protecting onboard electronics from line voltage spikes and grid anomalies.

Procurement Directors & Brand Owners

●Private-Label Multiple Listing (ML): Utilizing FEITUO's active master UL 924 file, our compliance engineers manage the administrative documentation to associate our certification directly with your trademark and catalog numbering.

●Direct Tier-One Economics: Sourced straight from FEITUO's automated SMT and assembly lines, eliminating middleman trading markups to deliver competitive container-load wholesale margins.

●Strict Component Traceability: Operating under an ISO 9001 certified quality framework, every production lot undergoes automated optical inspection (AOI) and 100% full-load burn-in cycles before packaging.

Supply Chain Directors

●Dual-Hub Manufacturing Footprint: FEITUO operates facilities in Ningbo, China, and Haiphong, Vietnam, providing flexible capacity allocation to mitigate single-region supply bottlenecks.

●Tariff Mitigation Support: Shipments fulfilled through FEITUO's Vietnam manufacturing hub include compliant non-China Certificates of Origin (C/O) to optimize customs duties on North American arrivals.

●Predictable Manufacturing Cycles: FEITUO maintains strategic safety buffer stocks of transformers, molded enclosures, and battery packs, ensuring dependable 30-to-35-day production lead times.

Business Owners & EPC Contractors

●Reduced Total Cost of Ownership (TCO): High-efficiency solid-state drivers consume minimal standby power, lowering continuous electrical draw across multi-unit commercial installations.

●First-Pass Inspection Assurance: Factory-tested compliance reduces the risk of punch-list delays, helping contractors obtain Certificate of Occupancy (CO) approvals on schedule.

Sales Leads & Commercial Distributors

●Inventory SKU Consolidation: Universal dual-voltage inputs, flexible wall/ceiling mounting configurations, and multi-angle optical pods allow a single SKU to satisfy a wide variety of project requirements.

●Project Registration Protection: FEITUO enforces formal project registration policies to prevent channel conflict and safeguard quoting margins for bidding distributors.

Specifications

Physical Dimensions & Shipping Specifications

Applications

Hospital

Hotel

Mall

Office Building

Outdoor

Parking Lot

Restaurant

Station

Supermarket

Installation Video

FAQ

How does the JLE-HD luminaire ensure compliance with NFPA 101 egress illumination requirements?

Egress codes mandate an initial average illumination level of 1.0 foot-candle along the path of travel, with no point falling below 0.1 foot-candle. The JLE-HD Series achieves this performance through custom collimating optical lenses placed over the 1.2W LED arrays. Unlike wide diffuse lenses that scatter light upward, these forward-throw optics direct beam candela downward and outward along the corridor floor, maximizing the center-to-center spacing between fixtures and reducing the total unit count required on project submittals.

What protective mechanisms are built into the internal charging and battery management circuitry?

The fixture utilizes a solid-state constant-current charger combined with a low-voltage disconnect (LVD) threshold monitor. While AC utility power is active, the driver maintains a regulated float charge to keep the 3.6V Ni-Cd battery fully energized without thermal degradation. During an outage, the battery powers the LED arrays until voltage reaches its designated safety floor, at which point the LVD circuit disconnects the load to prevent internal cell shorting and preserve cycle life.

How does the two-piece mechanical design accelerate installation for electrical contractors?

The JLE-HD luminaire employs a two-piece clamshell architecture. The back mounting plate detaches completely from the front optical enclosure. Installers can secure the structural plate directly onto an octagonal or square junction box, run the AC feeder wiring, and complete quick push-wire terminations unencumbered. Once wiring is verified, the front luminaire assembly snaps securely onto the backplate without requiring assembly tools or exposed screws.

What is the process for private-label brands to distribute this fixture under UL Multiple Listing?

FEITUO manages the complete Underwriters Laboratories Multiple Listing (ML) procedure on behalf of our OEM brand partners. Once catalog designations and packaging requirements are defined, our compliance engineering department files the necessary authorization forms linking FEITUO's active UL 924 master file to your proprietary brand name and model nomenclature. This enables your company to bring a certified life-safety product to market under your own brand identity without bearing the cost or timeline of standalone laboratory evaluations.

Request Wholesale Pricing & Engineering Submittals

Commercial electrical contractors, lighting distributors, and private-label brand managers can request comprehensive engineering submittal sheets, certified IES photometric data, and factory-direct volume pricing:

Please indicate your project voltage configuration (120V/277V or 120V/347V), preferred enclosure finish (White or Black), estimated procurement quantities, and target delivery port. FEITUO’s commercial engineering and export division will deliver formal engineering submittal packages, evaluation sample schedules, and tiered FOB/DDP quotations within 24 business hours.